|
|
|
Buying an Unfinished Home maybe Your Answer
For the first time “want-to-be” homeowner, purchasing an unfinished new home maybe just the answer. With mortgage interest rates still at record lows, there has not been a better time to purchase a home in decades. However, home prices have...
Buying your first home: a guide
So, you're about to take that first step up the property ladder
and buy your first home. It's an exciting time - but probably a
little confusing, too. There's so much to think about, and when
you're a first-timer on the property scene, it can be...
No More Estate Agent Fees
Follow a few simple guidelines, and marketing your own home can be easy. And it will save you thousands. The recent property boom has a lot of people thinking of selling. Unfortunately, the costs of selling can really eat into your profit....
Tips For Building A Song Bird Bird House
SONGBIRDS are among nature's greatest indicators of a quality environment. In and around many industrial centers where pollutants are rampant and in heavy agricultural areas where pesticide use is great, the number of songbirds has decreased in...
To Picket Fences
Of the 359 homeowners in my area, 112 are running afoul of the law in a deviously blatant way by committing the heinous "fence offence;" in other words, breaching Los Angeles municipal code sections 12.21 and 12.22 which limit front yard fence and...
|
|
| |
|
|
|
|
Building a pair of heavy duty saw horses
This pair of heavy duty saw horses is stable, sturdy and able to hold far more then most people will subject them to. Built from two by material, these saw horses will last a lifetime.
Start out by measuring and cutting all your stock according to the cutting list and set it aside. Take the legs and mark out the tapers. The taper starts 20" up from the bottom. The leg tapers to 3-1/2" at the bottom. Repeat for all the legs and cut out.
The legs join the main stretchers at 75°. This cut is best made with a circular saw. Mark your lines, clamp the stock on edge and cut. Flip the stock over to the other edge and make the through cut.
Time for some assembly. On the main stretcher mark a line 1-1/2" from each end. This is the outer face of the leg. Now make a second mark in from one edge 1". This is the top of the leg. Do this for each leg on both stretchers.
Apply some glue to the angled side of the leg and position on the marks you just made on the stretcher. Secure with 4 - 2" screws. Repeat for all the legs.
Position the 3/8" plywood braces on the outside face of the legs butting into
the the bottom face of the main stretcher. Scribe the angle onto the braces with your pencil and cut. Apply some glue to the outside of the legs and secure the braces with 6 screws, three into each leg.
Now draw 2 lines down the length of each top step, offset 3/4" from center. Countersink 5 holes, 3/4" deep in each step. Alternate the holes on each side of center. Position the top onto the stretcher flush with the ends. Secure with screws only.
Finally secure the lower step midway up the leg using screws & adhesive.
That's all there is to it. These saw horses will easily take the load of a lift of plywood or studs. Plus the make a great scaffold. Space about 8' apart and secure a 2 x 10 between them.
About the Author
Get more information including material and tool list and photos of these saw horses at www.all-wood-working-plans.com/heavy-duty-saw-horse.html. Read more articles at www.all-wood-working-plans.com/wood-working-articles.html
|
|
|
|
|
|